BIG RIPPER 29”

The 29” Big Ripper has been a staple in the SE line for over 10 years now. It’s built around a monster-sized PK Ripper style frame and features a stunning shiny red & chrome colorway. The spec is top notch with Cr-Mo Landing Gear forks, double-wall rims, Vee Speedster tires, and a new Lightning Bolt snap padset. One glance, and it’s easy to see that the Big Ripper is the baddest 29” BMX bike out on the streets.

  • Retro 6061 aluminum Big Ripper frame with floval tubing and looptail rear end
  • Full Cr-Mo Landing Gear forks
  • Cr-Mo Big Honkin’ cruiser bars
  • Double-wall rims with sealed bearing high-flange hubs
  • SE 3-pc V-Ridge cranks with alloy SE sprocket
  • Authentic ODI Mushroom II grips with donuts
  • Vee Tire x SE Racing Speedster 29” x 2.10” tires
  • SE Flyer seat with bottle opener
  • SE Racing Lightning Bolt Snap padset
  • SE Racing Rad Plate and SE Wheelie pegs
  • 29.6 lbs

COLOR(S)Shiny Red
FRAME6061 Aluminum Floval Tubing, Looptail Rear End, 68mm Euro Bottom Bracket, Retro Dropouts
FORKLanding Gear, Full Cr-Mo
CRANKSETSE V-Ridge 3-pc Cr-Mo, Cranks, 175mm, Sealed Euro Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 33T Alloy SE Racing Sprocket
PEDALSX-Pedo Low-profile Platform w/ Removable Pins
CHAINKMC S1
WHEELSETSealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 15T Freewheel, Stainless Spokes
TIRESVee Tire Co x SE Racing Speedster, 29" x 2.10" Front & Rear
BRAKESETTektro 837-AL V-Brake, Slick Cable
BRAKE LEVERSFSA NO.42/ACB Sealed 1-1/8"-1.5" Tapered, Integrated Headset
HEADSETTange 1-1/8" Threadless
HANDLEBARBig Honkin' Cr-Mo Cruiser Bar, 29" x 6", 10° Backsweep, 1° Upsweep
STEMRetro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
GRIPSSpecial Edition ODI Mushroom II Dual-Ply Grips, Made in USA, w/ SE Donuts,
SEATSE Flyer Seat w/ Custom SE Bottle Opener Brace
SEATPOSTMicro-Adjust Alloy, 27.2mm
SEAT CLAMPSE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter
ACCESSORIESSE Racing Rad Number Plate, Lightning Bolt Snap Padset, Alloy Valve Caps, SE Wheelie Pegs
WEIGHT29.6 lbs / 13.42 kgs
*Spec subject to change without notice
TOP TUBE, ACTUAL 23.6"
SEAT TUBE, CENTER TO TOP16.9"
SEAT TUBE ANGLE 71°
HEAD TUBE ANGLE 71°
CHAINSTAY LENGTH18"
WHEELBASE43.7"
BOTTOM BRACKET HEIGHT 12"
STANDOVER30.5"
SUGGESTED RIDER SIZE 5'5"+ (165cm+)
STEM55mm
HANDLEBAR WIDTH29"
CRANK175mm
WHEEL SIZE29"
SEAT POST DIAMETER27.2mm
Like It Then Share It: