STR-24 QUADANGLE 24”

Before the Quadangle there was the STR-1. This dates back to the late 1970s when Stu Thomsen was SE Racing’s National #1 pro and the sport’s first superstar. His signature frame at the time was the Stu Thomsen Replica-1. The STR-1 frame had a unique design with both of the double down tubes wrapping underneath the bottom bracket shell and continuing around the Looptail rear end all the way back to the seat tube. Less than ten STR-1 bikes were produced, making them almost mythical and the most sought-after frames of all time in the vintage BMX world. Fast forward over 40 years to today and SE is proud to bring you the third STR retro bike, the limited edition STR-24. All of the unique features and radness of the original STR-1, but built for the cruiser class with 24” wheels. This bike comes with an authentic SE Racing/Stu Thomsen trading card personally signed by Stu. Once again, “We Make It Happen.”

  • Stu Thomsen replica model, limited edition and individually numbered
  • Full Cr-Mo frame with STR-1-inspired double downtube wrap beneath the bottom bracket, looptail rear end, individually numbered on the inside of the rear dropout
  • Full Cr-Mo Cowboy Cut forks
  • Cr-Mo Big Honkin’ cruiser bars
  • Double-wall rims with sealed bearing SE Mohawk hubs
  • Redline Flight cranks with Redline Flight sprocket
  • Stu Thomsen Signature ODI Mushroom II grips with Stu Thomsen donuts
  • Vee Tire x SE Racing Cub 24” x 2.0” tires
  • Tange DX4 aluminum headset
  • Vintage chrome retro STR Quadangle padset
  • Stu Thomsen Flyer seat with bottle opener
  • SE Racing Rad number plate
  • Includes custom Stu Thomsen STR-24 sticker sheet and signed autograph card
  • 28.2 lbs

COLOR(S)SE Blue
FRAMEStu Thomsen Replica, 100% Cr-Mo Tubing, STR-1 Inspired Double Downtube Wraps Beneath 68mm Wide American Bottom Bracket, Looptail Rear End, Retro Dropouts, Limited Edition & Individually Numbered on the Inside of the Rear Dropout
FORKCowboy Cut Landing Gear, Full Cr-Mo
CRANKSETRedline Flight Cranks, Dual Pinch Bolt, 180mm, Sealed Bearing American Bottom Bracket, 134mm Spindle Length, 19mm Spindle Diameter, 39T Redline Flight Sprocket
PEDALSSE Racing Bear Traps
CHAINKMC Z6
WHEELSETSealed Bearing SE Mohawk Hubs, 36H High-Flange Alloy, w/ Double-wall Rims, 17T Freewheel, Stainless Spokes
TIRESVee Tire Co MK3 24" x 1.85" Front & Rear
BRAKESETTektro 837-AL V-Brake, Slick Cable
BRAKE LEVERSTektro 316A, 2-Finger Alloy
HEADSETTange DX4, Aluminum Cups, 1-1/8" Threadless, SE Wing Logos on Bottom Cup
HANDLEBARBig Honkin' Cr-Mo Cruiser Bar, 29" x 6", 10° Backsweep, 1° Upsweep
STEMRetro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
GRIPSSpecial Edition ODI Mushroom II "Stu Thomsen" Signature Dual-Ply Grips, Made in USA, w/ Stompin' Stu Donuts
SEATStu Thomsen SE Flyer Seat w/ Custom SE Bottle Opener Brace
SEATPOSTMicro-Adjust Alloy, 27.2mm
SEAT CLAMPSE Racing Champ Clamp, Alloy, 29.8mm Inner Diameter
ACCESSORIESSE Racing Rad Number Plate, Chrome STR Quad Padset, Alloy Valve Caps, Custom Stu Thomsen STR-26 Sticker Sheet, Authentic Trading Card Personally Signed by Stu Thomsen
WEIGHT28.2 lbs / 12.79 kgs
*Spec subject to change without notice
TOP TUBE, ACTUAL 22"
SEAT TUBE, CENTER TO TOP12"
SEAT TUBE ANGLE 72°
HEAD TUBE ANGLE 73.5°
CHAINSTAY LENGTH15.3"
WHEELBASE39.1"
BOTTOM BRACKET HEIGHT 12"
STANDOVER24.5"
SUGGESTED RIDER SIZE 5'+ (152cm+)
STEM55mm
HANDLEBAR WIDTH29"
CRANK180mm
WHEEL SIZE24"
SEAT POST DIAMETER27.2mm
Like It Then Share It: