STR-26 Quadangle
MSRP: $899
Before the Quadangle there was the STR-1. This dates back to the late 1970s when Stu Thomsen was SE Racing’s National #1 pro and the sport’s first superstar. His signature frame at the time was the Stu Thomsen Replica-1. The STR-1 frame had a unique design with both of the double down tubes wrapping underneath the bottom bracket shell and continuing around the Looptail rear end all the way back to the seat tube. Less than ten STR-1 bikes were produced, making them almost mythical and the most sought after frames of all time in the vintage BMX world. Fast forward 40 years to today and SE is proud to bring you the limited edition STR-26. All of the unique features and radness of the original STR-1, but built for the bigger rider with 26” wheels. This bike comes with an authentic SE Racing/Stu Thomsen trading card personally signed by Stu. Once again, SE’s BMX history repeats itself.
- Stu Thomsen replica model, limited edition and individually numbered
- Full Cr-Mo frame with STR-1-inspired double downtube wrap beneath the bottom bracket, looptail rear end, individually numbered on the inside of the rear dropout
- Full Cr-Mo Cowboy Cut forks
- Cr-Mo Big Honkin’ cruiser bars
- Double-wall rims with sealed bearing high-flange hubs
- Redline Flight cranks with Redline Flight sprocket
- Stu Thomsen Signature ODI Mushroom II grips with donuts
- Vee Tire x SE Racing Cub 26” x 2.0 tires
- Fluted micro-adjust seat post
- Vintage chrome STR Retro Quadangle padset
- Stu Thomsen Flyer seat
- SE Racing Rad Plate
- Includes custom Stu Thomsen STR-26 sticker sheet and signed autograph card
- 29.5 lbs
COLOR(S) | SE Blue |
FRAME | Stu Thomsen Replica, 100% Cr-Mo Tubing, STR-1 Inspired Double Downtube Wrap Beneath Bottom Bracket, Looptail Rear End, Retro Dropouts, Limited Edition & Individually Numbered on the Inside of the Rear Dropout |
FORK | Cowboy Cut Landing Gear, Full Cr-Mo |
CRANKSET | Redline Flight Cranks, Dual Pinch Bolt, 180mm, Sealed Bearing American Bottom Bracket, 39T Redline Flight Sprocket |
PEDALS | X-Pedo Low-profile Platform w/ Removable Pins |
CHAIN | KMC Z410A |
WHEELSET | Sealed Bearing 36H High-Flange Hubs w/ Double-wall Rims, 17T Freewheel, Stainless Spokes |
TIRES | Vee Tire Co x SE Racing Cub, 26" x 2.0" Front & Rear |
BRAKESET | Tektro 837-AL V-Brake, Slick Cable |
BRAKE LEVERS | Tektro 316A, 2-Finger Alloy |
HEADSET | Tange 1-1/8" Threadless |
HANDLEBAR | Big Honkin' Cr-Mo Cruiser Bar, 29" x 6" |
STEM | Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach |
GRIPS | Special Edition ODI Mushroom II "Stu Thomsen" Signature Dual-Ply Grips w/ SE Donuts, Made in USA |
SEAT | Stu Thomsen SE Flyer Seat w/ Custom SE Bottle Opener Brace |
SEATPOST | SE Retro Fluted Micro-Adjust Alloy, 27.2mm |
ACCESSORIES | SE Racing Rad Plate, Chrome STR Quad Padset, Alloy Valve Caps, Cutom Stu Thomsen STR-26 Sticker Sheet, Authentic Trading Card Personally Signed by Stu Thomsen |
WEIGHT | 29.5 lbs / 13.38 kgs |
| *Spec subject to change without notice |
TOP TUBE, ACTUAL | 22.1" | | | | | | | |
SEAT TUBE, CENTER TO TOP | 15" | | | | | | | |
SEAT TUBE ANGLE | 73° | | | | | | | |
HEAD TUBE ANGLE | 71° | | | | | | | |
CHAINSTAY LENGTH | 16.9" | | | | | | | |
WHEELBASE | 41.6" | | | | | | | |
BOTTOM BRACKET HEIGHT | 12" | | | | | | | |
STANDOVER | 27.7" | | | | | | | |
SUGGESTED RIDER SIZE | 5'3"+ (160cm+) | | | | | | | |
STEM | 55mm | | | | | | | |
HANDLEBAR WIDTH | 29" | | | | | | | |
CRANK | 180mm | | | | | | | |
WHEEL SIZE | 26" | | | | | | | |
SEAT POST DIAMETER | 27.2mm | | | | | | | |